LED REPLACEMENT ILLUMINATORS
Olympus, Nikon, Zeiss, Leica, Leitz, Reichert, AO

under construction

*IMPORTANT*

Do you know that most branded microscope manufacturers stop supporting their illuminators after 5-7 years of production? This means that if your microscope is that young and the halogen illuminator goes out, it's likely that the illuminator and parts are no longer available.  At this point you have just two options. You can buy a new microscope and send your scope to Surplus Inventory to sit on a shelf. Or, you can join the ranks of hundreds of our satisfied customers and replace the illuminator with our LED illuminator at a fraction of the cost!

Much of the time when a microscope starts burning out allot of bulbs or just quits working, the problem can be a bad printed circuit board (pcb). In order to keep the scope operational if the model is newer than 5 years you would need to replace the printed circuit board (if still available for approx. $800). Or, you could just buy a new microscope which will have an LED illuminator in it.

Now, Answer This. Would having to replace a microscope (not on the budget) create a problem for your lab? If you’re like allot of clinical and research labs around the country – it could be a crisis.  We know, because our company is in those labs every day. We sell and service major brand microscopes and have been for nearly 30 years. Replacing one microscope at $7-9k is bad enough for most labs.

Recently, one of our hospital labs that has over 20 working microscopes in service had 4 scopes that went out of commission due to defective pcb’s. To replace those four scopes would be 4 x $7k or $28,000. That can be a financial problem for some of the more prosperous labs.  

Fortunately, we came to their rescue with 4 LED illuminators.  The good news is, it only cost them $1995. And they installed them very quickly: three minutes per scope without any tools!

Our LED replacement illuminators are rated at 50,000 hours which is longer than the lifetime of the microscope! Your will never replace another bulb or board or component on a board! Guaranteed! 

Very Easy to replace the original halogen or tungsten lamp house. Installs in less than 5 minutes - without any tools! It works very well in ALL microscope techniques (phase contrast, polarization, etc.) since it is Daylight intensity and color balance. 

Please Inquire if you need an LED illuminator for Nikon, Olympus, Zeiss, and Leitz/Leica, Reichert, or AO microscope. Send me a message and I will respond with price, availability, and shipping costs if outside the USA. We will ship it to any of the 48 USA state for $24.50. 

 

Product Features: 

Long service life: 50,000 hrs! No more bulb replacements!

Low operating costs: power input approx. 10w(MAX); 

Lamp change as usual is no longer necessary; 

High light density, high image sharpness,sharp contrast; 

Less heat to microscope and specimen;

Reduced weight for microscope Z-drive;

No interference with the camera’s image frequency. 

Installation in under 4 minutes. No tools necessary! 

 

Product Specifications: 

Input: 100-250v AC, 50/60 Hz, 

Output: 0-12v DC, 0-1000ma, 

Flux: 900 Lux, 

Luminous intensity: > 80% after 50,000 hours 

Brightness adjustment: 0 - 100%, (256 gray levels) 

Colour: white 5500k

Your Light Balancing Daylight filter is no longer necessary 

 

One Year Warranty!  

Product   Price
OLYMPUS BX40 REPLACEMENT LED ILLUMINATOR   No Price

When considering a purchase you will want to know this:

TSC, Inc ships to the USA (48 Continental States), CANADA, and most countries throughout the world. Please take note that our Shopping Cart and Check Out can only be used if your shipping address is in the USA (48 States) or Canada, and you use a major credit card. If your shipping address is outside the USA (48 states) or Canada please contact our office with your complete shipping address & the product you wish to purchase. We will calculate the amount for you so you will be able to add the shipping amount and finalize your Check Out.  (Please do not attempt complete the Check Out until we have supplied you with the shipping amount.)

Credit Card Payments:

   If shipping to the USA or Canada please select the 'name of the product' you wish to purchase, and select 'USA' or 'Canada'. The correct S/H/Ins amount will automatically be added to your total so you can finalize the transaction.
TSC, Inc. and Authorize Net, our Credit Card Merchant Service Provider adhere to the most stringest Privacy regulations in the industry and do not share or sell any of our customer's credit card or personal information whatsoever. (Please email for full disclosure regarding this.)
 
Bank Wire Transfers / Company or Personal Checks / Money Orders / International Orders:
 
   Please send a message or call our office or if you wish to use Bank Wire Transfer, Personal, Business Check, or Money Order.
For orders from outside the 48 States (USA), or Canada, the only form of payment we accept is Bank Wire Transfer. We also accept Bank Wire  Transfers from anywhere for orders of $300 or more. Any payment must clear our bank prior to shipping. Depending on the type of payment, please allow between 3-7 days for the payment to clear. 
 
***Insurance is automatically included in the shipping amount on all shipments with a price greater than $100. This is to ensure protection for all parties.  
 
We are in the process of providing our customers with a more stream-lined Shopping Cart.
Thank you!
 
 
Tottleben Scientific Company

www.tscmicroscopes.com

tscinfo@charter.net

800 283 9997 Office

618 656 9008 Office

618 656 9599 Fax